Heavy duty type.
CARBON FIBER TRIPOD "GRAND PRO CF-4"
SLIK'S RECOMMENDATION FOR CAMERA/TRIPOD COMBINATION
35mm or Digital S.L.R.＋TELE PHOTO LENS 600mm/800mm
MIDIUM FORMAT +
TELE PHOTO LENS
LARGE FORMAT 4X5		 SUGGESTED LOAD CAPACITY (kg):
14kg
GRAND PRO CF-4

Ultra large-sized carbon fiber tripod with 36mm diameter carbon fiber pipes for first section leg. About 30% lighter than the same class of our tripod - The Professional, while most of functions are almost same as The Professional tripod. Worm gear type center column elevation. 2-way leg-tip (rubber and spike).
Soft grip for the first section leg.
Maximum height A: Maximum height of tripod with the tripod center column and legs fully extended. B: Maximum height of tripod with legs fully extended but the center column not raised.
A:2,540mm
B:2,255mm		 Minimum height The lowest operational height of tripod with legs fully spread and the center column in lowest position.
450mm
（230mm）		 Folded length The minimum folded length of the tripod.
825mm
Shape of leg pipe/tube and diameter of the first upper leg.
36mm
4-section		 Weight
3,800g
WORM GEAR ELEVATION
Multi-position
leg
Worm gear
type
Heavy-duty type CARBON FIBER TRIPOD.
Made from a special multi-layered cabon fiber material and 30 to 40% lighter in weight than the equivatent aluminum tripod.

LEG-LOCK TYPE
Twist lock system with double nut ring (crown-cap) type. (Japan Pat. No.3076794)
Rubberrized easy to grasp twist locks permit fast set-up and closure of individual leg segments.

3-POSITION LEG ANGLE ADJUSTMENT
For the lowest possible camera angle with the fully spread. (Japan Pat. No. 2802249)

WORM GEAR ELEVATION
Center column elevation works only at the turn of the crank, thus there is no accidental fall.The stiffness of the center column movement can be adjusted with the tension control cover.

SHORT CENTER COLUMN
By exchanging the center elevation column to the short center column (optional accesorry), you can obtain a very low height of 230mm.

REVERSIBLE PAN HEAD ATTACHIMENT SCREW
Including a reversible panhead mouting stud-available both 3/8" and 1/4".

2-way leg tip (rubber and spike).