Heavy-duty type
PRO SERIES TRIPOD "THE PROFESSIONAL"

Designed with the professional photographer in mind.
Ultra heavy construction for use with large format cameras (4"×5",8"×10"),
medium format cameras and 35mm SLR cameras with long telephoto/zoom lenses.
SLIK'S RECOMMENDATION FOR CAMERA/TRIPOD COMBINATION
35mm or Digital S.L.R.＋TELE PHOTO LENS 600mm/800mm
MIDIUM FORMAT +
TELE PHOTO LENS
LARGE FORMAT 4X5		 SUGGESTED LOAD CAPACITY (kg):
14kg
THE PROFESSIONAL 4

Extends up to 2,530mm, ideal for high position camera shots.
Maximum height A: Maximum height of tripod with the tripod center column and legs fully extended. B: Maximum height of tripod with legs fully extended but the center column not raised.
A:2,530mm
B:2,250mm		 Minimum height The lowest operational height of tripod with legs fully spread and the center column in lowest position.
590mm
(385mm)		 Folded length The minimum folded length of the tripod.
935mm
Shape of leg pipe/tube and diameter of the first upper leg.
36mm
4-section		 Weight
6,900g
 雲台型式／3ウェイ雲台
3-way
panhead
WORM GEAR ELEVATION
Multi-position
leg
Worm gear
type
THE PROFESSIONAL
Heavy duty construction. 3-way panhead provides ultra-smooth camera movement. Adjustable camera mounting screw for both 1/4" and 3/8".
Dual axis bubble level for precise horizontal positioning. Grooved tubular legs allow you to extend legs quickly and easily. Worm gear elevation control for precise height setting. 10cm indexed reference marks on the second leg section for precise leg alignment. 3-position, low angle leg locks permit setting the tripod up close to the ground for macro and close-up work.

3-POSITION LEG ANGLE ADJUSTMENT
The leg angle locks allow you to set the tripod to 3 different height positions. Each lock is independent, so you can set up quickly and easily on steps, or uneven terrain.

GROOVED TUBULAR LEGS
The groove, in the already dynamically strong circular tubing, prevents the leg from spinning around, and allows simple and secure locking. It also allows you to extend the leg from any section, regardless of the order.

INDEXED REFERENCE MARKS
The 2nd leg section has reference grooved marks at 10cm intervals, to allow you easy, and even height adjustments.

WORM GEAR ELEVATION
Center column elevation works only at the turn of the crank, thus there is no accidental fall.

LARGE/SMALL THREADCAMERA MOUNTING SCREW
The professional series has both large and small thread screws for use with a wide variety of cameras. The screw not in use fits into the side of the head where it's out of the way but always in handy.

REVERSIBLE HEAD ATTACHMENT SCREW
The reversible head attachment screw on the center elevation post lets you use heads with either large or small screw holes.

DUAL AXIS BUBBLE LEVEL
The head has 2 bubble levels for easy leveling, recessed against damages.

SHORT CENTER COLUMN
By exchanging the center elevation column to the short center column (optional accessory), you can obtain a very low height of 385mm.

LARGE RUBBER LEG LOCKS
Our large rubber contoured leg locks fit, and feel pleasant in the hands, and also lets you lock securely with minimum force.

RUBBER LEG TIPS
Specially designed rubber leg tips keep the tripod balanced, and stable, by always maintaining plane contacts with the ground.